M&T buffer tank, using the butt welding ,Duplex stainless steel Technology, applying to commercial/domestic storage water tank , heat pump water heater, solar water heater, electric water heater,boiler etc. OEM and ODM is available.
M&T buffer tank
A buffer tank is a ‘back up’ or reserve tank for storing hot water which can be called upon as and when needed. It can be used in conjunction with solar water heating, and boilers as part of a central heating sysem. The water is heated by the heat source (solar, biomass or wood gasification boiler) to a set temperature in the tank and this hot water can be stored until it is required. It therefore will reduce the ‘short cycling’ of a boiler, in that it will reduce the amount of times that a boiler will turn on and off to heat the water, and in doing this it will help to increase the lifetime of the boiler.
M&T buffer tank have high performance, which is available with one coil, two coils or no coil. Widely applying to commercial/domestic storage water tank , heat pump water heater, solar water heater, electric water heater,boiler etc.storage water, heat pump water heater, solar water heater, electric water heater,boiler etc.
|Inner tank diameter||mm||Φ370||Φ470||Φ500||Φ550||Φ600||Φ650||Φ700||Φ800|
|Out shell diameter||mm||Φ470||Φ560||Φ600||Φ650||Φ700||Φ760||Φ800||Φ900|
|Inner tank material||mm||SUS304 / SUS316L / Duplex2205 / Duplex2304|
|Out shell material||mm||galvanized steel with painting / stainless stell / PU|
|Out shell color||white / silver-grey / blue /red / golden / stainless stell|
|Water connection||G / BSP / NPT 3/4"||G / BSP / NPT 1"|